We have just acquired a large quantity of 12VDC Mabuchi RC-260RA 1" dia (23.8mm) x 1.05" (26.9mm) motor with a short 2.0mm (0.08" ) dia. shaft x 4mm long. We do not have the full specs on this motor. We do know that
this unit features carbon brushes, 3 pole construction, segmented isotropic magnets and has coil specs of 281 turns of 25mm dia wire. . Originally used in automotive applications.
11406 in stock
09/30/2010
QA006
|
Mabuchi RF-500TA-10750. These motors will operate on 0.7VDC to 9VDC. (draws from 10ma to 100ma) Great solar motor. Will run one month on a single "D" cell! Size: 1-1/4" dia x 9/16", with a shaft that is
1/16" dia. x 3/8" long. Bronze self-aligning bearings. 3 pole construction, stamped, forked metallic brushes, ring isotropic magnets, and coil specs of 750 turns of 10mm wire. 5" long black and white wire leads soldered to solder
terminals. Packed 250 pieces per carton. Mounting hole spacing is 26mm.
$8.95 Ea/25, $6.75 Ea/50, $5.90 Ea/100.
85 in stock
TE162
|
You get our most popular Mabuchi 12VDC motor (brand new surplus from a power tool manufacturer) along with a CSA/UL approved 110VAC/60Hz plug-in wall power supply. The power supply delivers 12VDC at 800MA. The power supply
has a 10 foot output cord with an inline on/off switch. Connect them up and you have a powerful motor with a hundred applications.
$4.45 Ea/25, $3.95 Ea/50, $3.45 Ea/100.
MG280
|
|
WORKS ON ONE PENCELL! OVER 125,000 IN STOCK!
|
MABUCHI model RS-555PH-3255. What a find.... Originally designed to be installed in portable drills and printers. (Also works as a fine little generator) This model features improved design to reduce external noise levels. Has
"wrap around" magnetic shield. High torque 380.3 gm-cm with a stall-torque figure of 1360 gm-cm. An excellent find for the small or medium sized OEM who requires modest quantities of this quality product but cannot satisfy the manufacturer's
demand for large quantity purchases. Hundreds of application in Robotics, the RC field etc. (shaft is 1/4 flat - stainless steel 1/8" dia). No load speed is 5500RPM - excellent for "gearing down" to provide ultra high torque for larger
projects. 1-7/16" dia x 2-5/8" long. Flatted shaft is 1/2" long. 3/16" push on terminals. Check the spec sheet by clicking the "more info" icon. For a larger photo, click on the photo above. This unit features 5
pole construction for higher torque and power efficiency, anisotropic magnets, and coil specs of 55 turns of 32mm wire. We have tested this motor on one alkaline pencell and find that it will deliver useable torque at reduced RPM. Superb for school
projects.
ATTENTION: IMPORTERS / EXPORTERS -
Call Ted Duskes at 800-341-6468 (514-739-8723) to negotiate large quantity pricing on this high quality, high power motor. (If you can use the entire lot - call Ted at 514-739-8723 for a very
special deal)
102052 in stock
MD522
|
|
ATTEN: AM RADIO STATIONS!
|
ARE YOU A RADIO STATION ON 730KHZ AM?
If you own and operate an AM station on 730, we have a golden opportunity for you!
THE DOMAIN NAME 73.COM IS FOR SALE!.
What a way to market your station - both ON-AIR and
ON-LINE!
This is a golden opportunity not to be missed!
Contact Ted Duskes 1 800 341 6468
or by email.
TS711
|
|
LUCKY NUMBER FOR SALE! 73 DAYS IN A SEASON!
|
I have a 2 digit domain name for sale. Two digit domain names are very hard to find, but this has been active and in use since 1994. Ideal for the Chinese market! Contact me for more info. Ted, 514-739-8723 or Email me!
MG549
|
MABUCHI DC MOTOR. Numbers appearing on this motor are FC-280pt-20150. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. This motor was made for Ford.
Made in Vietnam.
New
$24.95 Ea/4, $19.95 Ea/10, $17.95 Ea/25.
380 in stock
MF586
|
|
MABUCHI FK-280PM-10887A. Diameter 18.3mm x 24.2mm - length 30.5mm. 6 - 15VDC (12VDC nominal). 15mm shaft. No load speed 13,600RPM @ 0.07A.
$1.45 Ea/500, $1.15 Ea/2500, $1.05 Ea/10000, $0.95 Ea/20000.
474 in stock
TG691
|
Over 7,000 Mabuchi FK260SA-14280 motors available. Oval shape with dimensions of: 1-3/8" long x 7/8" wide amd 1/16" dia. shaft which is 9/16" long. We believe that this motor was originally for
use in Rearview mirrors, electric shavers, credit card readers and other low voltage, low current applications. Electrical specs for this motor, in JPG format, are available by clicking the MORE INFO button. These units are brand new, packed 200 per
carton.
1 in stock
DC330
|
What a find - Mabuchi RK370CA-18260, 6-18vdc 8,500 rpm motor. Nominal voltage - 13vdc. Check the full spec sheet - click the "more info" icon. These units are supplied with lead wires and mini connector installed (not shown
in photo).
New
$2.90 Ea/250, $3.50 Ea/100, $4.19 Ea/50, $4.79 Ea/20.
TS375
|
Popular for Automotive Use!
|
MABUCHI DC MOTOR. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. We believe that is a common motor model found in many different automotive
applications such as mirror adjust, door lock, and other remote operated devices. No sure of specific applications!
New
$24.95 Ea/4, $19.95 Ea/10, $15.00 Ea/50.
380 in stock
TS519
|
What a find - this 12vdc mini motors was originally designed for use in automotive mirror applications, but has thousands of other uses in hobby, micro-tool, RC and educational applications. No load speed is a hefty 8200 -
11000rpm. Stalled torque is 3.75oz-in and stall torque is 5.0A. Click the "more info" icon for the full drawing and specs.
TS458
|
Here is a tutorial that explains in simple "baby talk" how little DC electric motors work. Take a few minutes to read it over, and enjoy learning what makes them spin. A little knowledge goes a long way and can serve you
well if you work in the world of motors. Enjoy! 
MG043
|
|
DOUBLE FLATTED SHORT SHAFT!
|
Mabuchi RC-260RA-08570 (BD152913) mid sized motor - note that double flatted shaft is as per photo above. The DC connection terminals on this model have been designed to allow for soldering and mounting purposes - they are flat and
parallel to the face of the motor. Ultra-unique, this model was designed for a high duty cycle point of sale device.
$3.95 Ea/20, $2.95 Ea/50, $1.95 Ea/250.
345 in stock
TS124
|
|
|
UNIQUE DOUBLE FLATTED SHAFT
|
Mabuchi RC-260RA-08570 (BD162917) mid sized motor (click "more info" icon for drawing - note that double flatted shaft is as per photo above). The dc connection terminals on this model have been designed to allow for
soldering and mounting purposes - they are flat and parallel to the face of the motor. Ultra-unique, this model was designed for a high duty cycle point of sale device.
$3.95 Ea/20, $2.95 Ea/50, $1.95 Ea/250.
393 in stock
TS125
|
Mabuchi FC-130RF-VD154409. A truly unique mini motor with ultra small, flat shaft allows construction of ultra miniature projects. Flat shaft allows easy attachment of accessories, etc. Click on the "more info" icon to see
a detailed drawing - NOTE: shaft on units we are selling is much shorter than shown in the diagram... as per the photo on this web page. Designed for 12VDC operation in industrial heavy duty applications.
$2.19 Ea/20, $1.79 Ea/50, $1.19 Ea/100, $0.99 Ea/500.
6553 in stock
TS126
Mabuchi FC-130RF-VN05415. A truly unique mini motor with ultra small, flat shaft allows construction of ultra miniature projects. Flat shaft allows easy attachment of accessories, etc. Click on the "more info" icon to see a
detailed drawing - NOTE: shaft on units we are selling is much shorter than shown in the diagram... as per the photo on this web page. Designed for 12VDC operation in industrial heavy duty applications.
$2.19 Ea/20, $1.79 Ea/50, $1.19 Ea/100, $0.99 Ea/500.
9196 in stock
TS127
Mabuchi RF-500T-10750. GREAT SOLAR MOTOR! 2,700 RPM. These motors will operate on 1.5 - 12.0VDC (draws from 20ma to 85ma) Great solar motor. Will run one month on a single "D" cell! Size: 1-1/4" dia x
9/16", with a shaft that is 1/16" dia. x 3/8" long. Mounting holes are 24mm spacing (which is different than on the spec sheet - please note). Bronze self-aligning bearings. 3 pole construction, stamped, forked metallic brushes,
ring isotropic magnets, and coil specs of 750 turns of 10mm wire. 5" long black and white wire leads soldered to solder terminals. Packed 250 pieces per carton. Click the "more info" icon for the full spec sheet.
$7.90 Ea/10.
11 in stock
TS001
|
We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but
check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects.
This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications.
$3.95 Ea, $2.25 Ea/100, $2.00 Ea/500, $1.85 Ea/1000.
26262 in stock
TS026
|
We have just acquired a small quantity of Mabuchi RC-260RA 1" dia (23.8mm) x 1.05" (26.9mm) motor with 2.0mm (0.08") diameter, 10mm (3/8") long shaft. We do know that this unit features carbon brushes, 3 pole
construction, segmented isotropic magnets and has coil specs of 255 turns of 25mm dia wire. Originally used in automotive applications.
$2.25 Ea/100, $2.00 Ea/500, $1.85 Ea/1000.
1818 in stock
TS024
|
Mabuchi # FF-N20PN. Miniature 1.5 to 3 Volt DC motor. Ideal for models and radio controlapplications where small size is important. No load rating: 15,800 RPM @ 2.4 V, 96 mA.Length (excluding shaft), 0.654” long x
0.47” x 0.39”. Shaft is 0.039”(1mm) diameter x 0.13” long. Solder-loop terminals.
$0.89 Ea/500, $1.19 Ea/250, $1.49 Ea/100, $2.57 Ea/50.
2168 in stock
MC425
|
