|
ALL ITEMS ON THIS LIST IN STOCK - QUICK DELIVERY!
|
Ted Duskes has over 45 years experience in the buying, selling and locating of electronic parts and components.
This list contains over 2200 distinct, in-stock items.
Ted is ready to roll up his sleeves and get down to the nitty gritty negotiations to turn our in-stock inventory into
YOUR inventory.
All items on this list are negotiable!
Call Ted TODAY!
1 800 341 6468
TS310
|
SA417
Japan Servo Massive 120VAC Motor with 3 Different Output Shafts.High quality extremely high torque fan cooled Japan Servo Co. motor weighs about 6 1/2 lbs and has 3 shafts: Shaft 1 rotates at 410rpm, Shaft 2 at 195rpm and Shaft 3
at 180rpm. Each shaft is .24" Dia. x at least .45" L. Two of them are "D" type shafts. Features 14uF cap on motor and an overall size of motor about 5.5" L x 3.4" Dia. Size of gearhead face about 6.5" diagonal x 5" x 4.2". Has ground lead and 2 AC input
leads.
NEW condition.
$29.00 Ea/5.
MF149
We have been offered the following brand new motors; HURST: 3 each of (PCDA) 990535, 2 each of (PC) 990525, 2 each of (PCDA) 990513, MAXON: 3 each of 118783. I am accepting offers for this lot. Ted 514-739-8723
ME573
|
Molon Motor & Coil Corp. 115 VAC, 60 Hz, approximately 100MA AC gear motor. Approximately 30 Oz/in torque @ 145 RPM. Capacitor run motor, supplied with a 1 UF 250 V capacitor. Gearbox is 2.38" square with 4mm threaded holes in two
corners. Shaft is 0.25" diameter (flatted) x 0.45" long. Overall depth of motor body is 1.8." New motor, prepped with connector on 4" leads. CSA.
$18.85 Ea/5.
ME524
120VAC motor with a gearbox. Delivers 80RPM. Draws 1.6A no load and stalls at 2.5A. The motor shaft is 3/4" long x 3/8" dia and rotates clockwise. Measures 4-3/8" x 3-1/4" x 2-1/2" Weighs 3 lbs.
$19.80 Ea/10.
ME318
26 RPM 45 VAC GEARMOTOR. Removed from service. Inline parallel shaft gearmotor. Mounting holes are drilled and tapped. Specifications; RPM 26, Voltage 45 VAC, Amps 0.600 (no load), Rotation CW, Duty Int. 4 hole face mount on
1-9/16" x 1-5/8" centers.
Shaft 3/16" diam. x 5-1/4" w/ 10-32 threaded end. Overall Size 1-1/4" x 2-1/2" x 4-7/8"
weighs 2 lbs.
$9.85 Ea/10.
ME046
Powerful shaded pole 30 RPM gearmotor. Intermittent duty cycle. Thermally protected. Runs for approximately 2 minutes before shutdown. 115 Vac, 60 Hz. Idle Amps, 3.8. CCW rotation, facing shaft. 3/8" diameter x 1.1" long shaft. End
0.5" portion of shaft has 5/16" diameter thread. Gearbox is 4" x 2.87" x 0.58" thick with three mounting holes. Motor extends 3" behind gearbox. 0.25" qc/ solder terminals. UL.
$29.00 Ea/5.
MD985
Compact yet powerful reversible gearmotor made by MERKL KORFF. 52.5% duty cycle. Use on displays, rotisseries, mixers, etc. 2.5 mfd capacitor required (not supplied). specs; 175 RPM, 115 volt AC, 22 inch oz. torque, Shaft 5/16" dia
x 1 1/2" w/flat, Size 3 3/4" x 2 1/2" x 3 1/2". Removed from used equipment. Weighs 4 lbs. 388 more available.
$18.25 Ea/5.
15 in stock
MD726
90 RPM BODINE #42Z4BFC1 -E2. Motor rated 115 VAC 60 Hz single phase. Ratedcurrent 1.2 amps. Motor rpm is 900. Rated for intermittent duty. Motor is reversible.Gearbox rated 10:1. Rated torque output 4S lb-in. Ball and roller
bearings throughout.Has shrouded cooling fan built on rear of motor. Requires 12.5 MFD capacitor for operation (not supplied). Shaft: 3/4" dia. x 1-5/8" long. Shaft has keyway slot for 3/16" sq.key. Motor has four tapped spacers on front of gearbox for
mounting. These are tapped 1/4X28. Bolt centers ofmounting holes are 3-5/8" apart Dimensions (not including shaft): 4-5/8" nom. at gearbox end x 8-7/8" long.
$138.00 Ea.
MD559
|
212/254 RPM 50/60 HZ BODINE MOTOR #42YBFC1-02. 115 VAC, 50 Hz, singlephase, 1.S amps. CCW rotation. 1/12 hp, 1400 rpm. Continuous duty. Ball bearing.40°C temperature rise. Gear ratio 6.67:1. Incline gearbox. (Rated @ 50 Hz 212 rpm,
17in-lb torque.) (Rated @ 60 Hz 254 rpm, 1/16 hp, 13 in-lb torque.) Dimensions: 5" dia. x9" long. Shaft: 1/2" dia. x 3/4" long. 4-hole front mounting.
$99.00 Ea.
MD560
311 RPM HOWARD INDUSTRIES (MSL) #5-20-0072. Motor is rated 115 VAC 50 Hz@1.4 amps. Continuous duty. Sleeve bearings are used throughout The rated torque is10 in-lb. Requires a 72 to 88 MFD 125 VAC capacitor for operation (not
supplied). Thismotor will run slightly faster if operated on 60 Hz. Shaft: 3/8" dia. x 15/16" long. The shafthas a single 7/8" long flat on one side. Four 3/16" dia. clear mounting holes are locatedin the mounting ears on the front of the gearbox. The
shaft is centered within the mounting holes. Dimensions:4-1/18" dia. max (across mounting ears) x 7" long (excluding shaft).
$89.00 Ea.
MD561
|
%20x%200.45%22%20long.%20Over%61ll%20depth%20of%20motor%20body%20is%201.8.%22%20New%20motor,%20prepped%20with%20connector%20on%204%22%20le%61ds.%20CSA.&stock_qty=0&img_name=me524.gif&img_width=200&img_height=205&im
g_alt=145 RPM AC GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
,%20Rot%61tion%20CW,%20Duty%20Int.%204%20hole%20f%61ce%20mount%20on%201-9%2F16%22%20x%201-5%2F8%22%20centers.%D%ASh%61ft%203%2F16
%22%20di%61m.%20x%205-1%2F4%22%20w%2F%2010-32%20thre%61ded%20end.%20Over%61ll%20Size%201-1%2F4%22%20x%202-1%2F2%22%20x%204-7%2F8%22%D%Aweighs%202%20lbs.&stock_qty=0&img_name=me046.gif&img_width=200&img_height=153&img_alt=ELECTRIC MOTOR
CORP ELECTRIC MOTOR CORP 26 RPM 45 VAC GEARMOTOR "Contact ted, the specialist for this
product"){kind=small}
.%20specs%3B%20175%20RPM,%20115%20volt%20AC,%2022%20inch%20oz.%20torque,%20Sh%61ft%205%2F16%22%20di%61%20x%201%201%2F2%22%20w
%2Ffl%61t,%20Size%203%203%2F4%22%20x%202%201%2F2%22%20x%203%201%2F2%22.%20Removed%20from%20used%20equipment.%20Weighs%204%20lbs.%20388%20more%20%61v%61il%61ble.&stock_qty=15&img_name=md726.gif&img_width=185&img_height=200&img_alt=MERKL
KORFF AC GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
.%20Sh%61ft%3A%203%2F4%22%20di%61.%20x%201-5%2F8%22%20long.%20Sh%61ft%20h%61s%20keyw%61y%20slot%20for%203%2F16%22%20sq.key.%20Motor%20h%61s
%20four%20t%61pped%20sp%61cers%20on%20front%20of%20ge%61rbox%20for%20mounting.%20These%20%61re%20t%61pped%201%2F4X28.%20Bolt%20centers%20ofmounting%20holes%20%61re%203-5%2F8%22%20%61p%61rt%20Dimensions%20(not%20including%20sh%61ft)%3A%204-5%2F8%22%20nom.%
20%61t%20ge%61rbox%20end%20x%208-7%2F8%22%20long.&stock_qty=0&img_name=md559.gif&img_width=200&img_height=111&img_alt=BODINE 42Z4BFC1-E2 AC GEARHEAD MOTOR "Contact ted, the specialist for this product"){kind=small}
%20%235-20-0072.%20Motor%20is%20r%61ted%20115%20VAC%2050%20Hz%401.4%20%61mp
s.%20Continuous%20duty.%20Sleeve%20be%61rings%20%61re%20used%20throughout%20The%20r%61ted%20torque%20is10%20in-lb.%20Requires%20%61%2072%20to%2088%20MFD%20125%20VAC%20c%61p%61citor%20for%20oper%61tion%20(not%20supplied).%20Thismotor%20will%20run%20slightl
y%20f%61ster%20if%20oper%61ted%20on%2060%20Hz.%20Sh%61ft%3A%203%2F8%22%20di%61.%20x%2015%2F16%22%20long.%20The%20sh%61fth%61s%20%61%20single%207%2F8%22%20long%20fl%61t%20on%20one%20side.%20Four%203%2F16%22%20di%61.%20cle%61r%20mounting%20holes%20%61re%20l
oc%61tedin%20the%20mounting%20e%61rs%20on%20the%20front%20of%20the%20ge%61rbox.%20The%20sh%61ft%20is%20centered%20within%20the%20mounting%20holes.%20Dimensions%3A4-1%2F18%22%20di%61.%20m%61x%20(%61cross%20mounting%20e%61rs)%20x%207%22%20long%20(excluding%
20sh%61ft).&stock_qty=0&img_name=md561.gif&img_width=200&img_height=111&img_alt=HOWARD INDUSTRIES 5-20-0072 AC GEARHEAD MOTOR "Contact ted, the specialist for this product"){kind=small}
