|
ALL ITEMS ON THIS LIST IN STOCK - QUICK DELIVERY!
|
Ted Duskes has over 45 years experience in the buying, selling and locating of electronic parts and components.
This list contains over 2200 distinct, in-stock items.
Ted is ready to roll up his sleeves and get down to the nitty gritty negotiations to turn our in-stock inventory into
YOUR inventory.
All items on this list are negotiable!
Call Ted TODAY!
1 800 341 6468
TS310
|
SA417
Here is a tutorial that explains in simple "baby talk" how little DC electric motors work. Take a few minutes to read it over, and enjoy learning what makes them spin. A little knowledge goes a long way and can serve you well if
you work in the world of motors. Enjoy! 
MG043
|
Sayama. Compact, good-quality 12VDC gearhead motor. 58RPM, @ 12VDC, 20mA (no-load). 12mm diameter x 35mm long. Solder-lug terminals. 2mm diameter x 6mm long flatted shaft.
$27.85 Ea/5.
MF949
Faulhaber miniature Swiss-made precision motor and 141:1 gearhead with a right-angle drive. Motor and gearhead are 0.63" diameter x 2.2" long. Right-angle drive assembly adds 0.65" in length. 80 RPM @ 6VDC, 18 mA (no-load rating).
6-conductor ribbon cable with 2 x 3 socket connector, 0.1" spacing. Leads 1 and 6 power the motor. Fairly powerful for its size. Removed from working equipment. Good condition.
$24.65 Ea/5.
MF950
Powered by a Buehler motor with a brass worm gear, this gear train provides decent torque at voltages from 12 to 30 VDC. Approximate overall dimensions, 5.4" x 2.5" x 1.5." Two nylon gears are mounted on a metal plate with threaded
mounting holes. The larger, final-drive gear is 1.94" diameter and has an offset shaft that could be used to power a back-and-forth motion. Removed from used equipment. In good condition. Test Specs:12Vdc 57mA 50 RPM, 14Vdc 68mA 104 RPM. Torque 66
oz-in/Amp 60/1 Gear ratio. Please click pic to enlarge.
$29.95 Ea.
MF850
12VDC permanent magnet motor. 150:1 gearbox. No-load speed is 25 RPM @ 12Vdc, 56mA. With a 20 oz-in load, speed is 23 RPM @ 100mA. Plastic motor, gearbox and mounting flange. 1.5" diameter x 2.6" long overall. Mounting flange is
1.55" square with holes in four corners. Shaft is 0.16" diameter x 0.4" long. Solder-loop terminals on side of motor. Click picture for bigger view.
$34.85 Ea/5.
MF862
FoMoCo Ford Explorer. 130 RPM @ 12VDC/860MA, no-load rating. Final drive shaft is 0.27" diameter x 0.32" long with an easily removable 0.54" diameter gear. Overall dimensions, 6.38" x 3.78" x 1.65". Gearbox has two mounting holes
on 3.10" centers. Gearbox case has a plastic cover containing a pc board which must be removed to make the motor useful for non-Ford applications. Please click pic to enlarge.
$28.85 Ea/5.
MF863
Portescap (escap) Gearhead R16 6 166. Precision, Swiss-made motor and gearhead. Quiet, smooth-running. Lots of torque for its size. 48 RPM @ 7.5 Vdc @ 21 mA. 17mm diameter x 50mm long (excluding shaft). 3mm diameter x 8mm long
flatted shaft. Solder lug terminals. Clic pic for larger view.
$29.95 Ea.
MF825
|
GEAR MOTOR WITH WORM REDUCTION
|
Originally manufactured for use by Xerox, this gear motor with worm reduction produces a shaft speed of 240 - 268rpm under load (54Ncm) with a current drain of only 1.285 A. Click the "more info" icon for full specs and drawing.
$29.95 Ea, $24.95 Ea/10, $19.95 Ea/50.
248 in stock
TS193
|
Designed to meet exacting Xerox standards, this Buehler beauty is a powerhouse... produces 80Ncm torque with only 0.68 - 0.83A draw at 77 - 94Rpm - or 114-133rpm @ 20Ncm torque with only 0.195 - 0.290A draw. Can be used
bi-directionally. Full drawing and specs available - click the "more info" icon.
$49.95 Ea, $39.95 Ea/5.
18 in stock
TS194
|
25VDC operation. Produced originally for use by Xerox, this 2.7" (overall length) gearmotor features a semi-flat shaft for ease of adaptation to your specific requirments. 80rpm no load speed with only 140ma current draw. At 31Ncm,
spped is 74rpm and drain is a low 500ma. Click the "more info" icon for full specs and drawing.
$29.95 Ea, $24.95 Ea/5.
47 in stock
TS195
24VDC gearmotor is 2.5" long (not including shaft, which is .9" long). Gear ratio is 30:1. Bi-directional operation. At 50Ncm torque, speed is 180rpm and current drain 830ma. Full specs and drawing available - click the "more info"
icon.
$25.95 Ea, $19.95 Ea/5.
31 in stock
TS196
|
High performance Buehler model 16104615500 12VDC gearmotor. Draws only 650MA at a load of 7Ncm and operates at 330rpm. Shaft is 0.20" diam x 0.37" long semiflat. Can be used bi-cirectionally. No load sped is 490rpm. Click the "more
info" icon for full specs and drawing!
$29.95 Ea, $19.95 Ea/3, $17.95 Ea/10, $16.95 Ea/20.
390 in stock
TS197
|
|
12VDC operation. Buehler model 16104615600. Heavy duty, 2.5" length, 1.3" diameter gearmotor features a semiflat shaft (approx 1/8" dia x 1/2" length) and bi-directional operation. At a load of 20Ncm, speed is 106rpm and current
drain is 650ma. Full drawing and specs - click the "more info" icon.
$19.95 Ea, $17.95 Ea/10, $16.95 Ea/25, $12.95 Ea/100.
547 in stock
TS198
|
|
12VDC - 30NCM TORQUE GEARMOTOR
|
Excellent for modellers, robotics, small electric vehicle experiments, etc. Great Buehler model 16104615700 12VDC gearmotor is 2.8" long x 1.4" diameter. Shaft is 0.20" semiflat x 0.5" length. Bi-directional operation. At 12vdc,
390ma, speed is 42rpm and torque is 30Ncm. For full specs,. click the "more info" icon.
$29.95 Ea, $17.95 Ea/10, $15.95 Ea/25, $12.95 Ea/100.
623 in stock
TS199
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. This is a great motor for modellers, robotics, science projects, etc.
Full drawing and specs - click the "more info" icon.
$14.95 Ea, $12.95 Ea/10, $11.95 Ea/25, $9.95 Ea/100.
467 in stock
TS200
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. This is a great motor for modellers, robotics, science projects, etc.
Full drawing and specs - click the "more info" icon.
$14.95 Ea, $12.95 Ea/10, $11.95 Ea/25, $9.95 Ea/100.
1240 in stock
TS201
Barber-Colman permanent magnet gearhead motor. Rated 14 VDC @ 650 mA. Reversible. Sleeve bearing. 400 rpm, 325 mA no load speed. 350 rpm @ 7.5 oz in torque. 650 mA. Continuous duty. 34 oz-install torque @ 2.2 amps. Generator
brushless AC output. 6 VAC out @ 1800 rpm. Gearhead ratio 10:1. Dimensions: 2" dia. x 3-1/4" long. Offset shaft 1/4" dia. x 1" long with flatted side. Face mount. Two tapped holes.
$24.85 Ea/10.
MF388
Marked CB2D. This gear motor will operate over the range of 6 to 24 VDC. At 12VDC it delivers 6.8 RPM. At 24VDC it delivers 14.6RPM. The motor is 1-1/4" dia. x 2-11/16" long. The flatted shaft is 3/16" dia. x 3/8" long. The overall
length of the assembly is 2-1/2". Diameter of the gearhead is 1-1/4" Motor terminals are .110"
$24.85 Ea/5.
MF214
Contains 3VDC motor, 2 sets of gears, metal shafts, gearbox and other accessories. Great for modelmakers, robotics, experimenters and hobbyists. Please click the more info button to see the spec sheet.
$12.85 Ea/5.
MF086
Portescap Motor 17N78210E1. Portescap Gearhead R164352. Precision, Swiss-made motor and gearhead. Quiet, smooth-running. Lots of torque for its size. 24 RPM@12VDC @ 22 mA, no-load specs. 17mm diameter x 55mm long (excluding shaft).
3mm diameter x 8mm long flatted shaft. Solder-lug terminals.
$39.75 Ea/5.
MF064
Buehler DC motor and right-angle gearbox provide lots of torque for mechanical projects. 5/16" diameter x 2" long shaft can be positioned on either side of the motor. Motor is 2.13" diameter x 3.90" long. 6.25" overall length of
assembly. Heavy-duty metal bracket has mounting holes on 3.75" centers. No-load measurements: 46 RPM @ 24 Vdc / 260 mA. Motor operates as low as 14 Vdc. 6" long pigtail leads. Motor removed from used equipment, in good condition.
USED condition.
$49.75 Ea/5.
MF065
Namiki Small, fairly powerful, precision gearhead motor. Operates smoothly between 3-15 Vdc. No load measurments: 70 RPM @ 6 Vdc @ 50 mA. 22 mm diameter motor. Length of motor and gearbox, 60mm. 4mm diameter x 20mm long shaft.
Shaft at rear of motor extends 10mm and has fan blades. 3" long wire leads. Used, very good condition.
USED condition.
$21.85 Ea/10.
ME837
We have been offered the following brand new motors; HURST: 3 each of (PCDA) 990535, 2 each of (PC) 990525, 2 each of (PCDA) 990513, MAXON: 3 each of 118783. I am accepting offers for this lot. Ted 514-739-8723
ME573
Compact, smooth-running Buhler gearhead motor. Operates from 3 - 24 VDC. No-load rating: 140 RPM @ 18 VDC/140 MA. Body: 1.91" x 1.59" x 1.14." 3mm diameter shaft is 0.4" long. 8" wire leads. Three threaded mounting holes on face of
motor.
$26.85 Ea/5.
ME523
Rugged 5 RPM 12VDC gear motor designed to move baffles in automobile air conditioning. Great for continuous or intermittent use where power, slow rotation, low noise and low current are desired. Mechanism consists of a small DC
motor with a worm gear driving a four gear train. Final drive is a plastic splined shaft, 0.52" diameter x 0.5" long. The composite plastic housing is easily opened for access to the motor, gears and electrical terminals. Overall dimensions of assembly
including mounting flanges and shaft is approximately 3.12" x 4.25" x 1.62." No load measurements: 5 RPM @ 13.5 Vdc @ 15 mA.
$19.00 Ea/5.
ME512
Pittman GM8712G416-R2. Exceptional value - excellent for RC applications, robotics, automotive applications, etc. Superb quality Pittman motor features a 922.5:1 gear reduction ratio. Units are brand new, and fully guaranteed.
Specs, as supplied by one of our clients:
Output shaft - 1/8" diameter x 5/16" long, No load RPM @ 12VDC: ~8.1RPM, No load current @ 12VDC: ~325ma, No load RPM @ 6VDC: ~ 3.75RPM, No load current @ 6VDC: ~250ma
Normal distribution channel pricing for this motor is as high as $87. Samples available at $38 in singles. Click the more info button for a PDF file on similar (not exact) Pittman motors to view typical quality and performance for this style of motor.
Click the picture for a larger photo.
$21.95 Ea/3, $19.95 Ea/5, $17.95 Ea/10, $15.95 Ea/50.
249 in stock
TS081
|
Pittman GM8712G416-R3. Exceptional value - excellent for RC applications, robotics, automotive applications, etc. Superb quality Pittman motor features a 922.5:1 gear reduction ratio. Units are brand new, and fully guaranteed.
Normal distribution channel pricing for this motor is as high as $87. Click the more info button for a PDF file on similar (not exact) Pittman motors to view typical quality and performnce for this style of motor. Click the picture for a larger photo.
$24.95 Ea, $19.95 Ea/5, $17.95 Ea/10, $15.95 Ea/50.
200 in stock
TS063
|
|
Small high-torque gear motor for automotive application made by Denso. This reversible motor was probably for power windows or seats. The final output is 162 RPM @ 12 Vdc / 1.5 Amps, no-load measurement. The drive shaft is 0.35"
diameter x 1.25" long. Overall length is 7.50." 3.75" wide x 2" thick at widest and thickest points. Gear housing is metal. Three tapped mounting holes around the drive shaft. 16" wire leads. This is the right-hand configuration. This motor is also
available in left-hand configuration see ME045
$39.95 Ea/5, $32.45 Ea/10.
3 in stock
ME044
Denso 162000-2241. Small high-torque gear motor for automotive application made by Denso. This reversible motor was probably for power windows or seats. The final output is 162 RPM @ 12 Vdc / 1.5 Amps, no-load measurement. The
drive shaft is 0.35" diameter x 1.25" long. Overall length is 7.50." 3.75" wide x 2" thick at widest and thickest points. Three tapped mounting holes around the drive shaft. 16" wire leads. Gear hosuing is metal. This is the left-hand configuration. This
motor is also available in right-hand configuration see ME044
1 in stock
ME045
Powerful 12 VDC windshield wiper motor. GM 15094704. Fits; 2002 to 2005 Envoy, Bravada and Trailblazer SUVs. 65 RPM @ 12 Vdc, 2.5 Amps (no-load rating). Diecast metal housing with plastic circuit housing is 7.75" long x 5" x 3.5."
A metal arm with a ball-joint is affixed to the 5/16" drive shaft with a nut. A 10-pin connector and plastic housing containing circuitry are attached to one side of the motor. An interesting and possibly useful feature of this motor is that it always
stops in the same position when the power is switched off. If a momentary connection is made, the motor will rotate exactly one revolution.
$29.00 Ea/5.
ME004
Powerful little 6-12 VDC gearhead motor. 2.43" long, excluding shaft. 1.3" diameter x 1.15" long gearbox. Flatted 0.2" diameter x 0.39" long offset shaft. Three tapped mounting holes on motor face. No-load ratings: 3 RPM, 6 VDC, 75
mA. 6 RPM, 12 Vdc, 85 MA.
$27.80 Ea/5.
4 in stock
MD979
These are brand new 12VDC motors complete with integrated gearhead, manufactured to power electric automobile windows. Power is transmitted to a 1/4" x 1/4" shaft. Very powerful. The overall size of the assembly is 7-1/4"L x
3-3/4"H x 1-1/2"Thick. The motor alone is 1-1/2" x 3-3/4" x 2". We have over 900 in stock at press time. Exactly as pictured. Click photo to enlarge!
$12.85 Ea/10.
429 in stock
MD731
|
4.6 RPM. 24 VDC permanent magnet, reversible. Ball bearing motor, sleeve bearings on gearbox. Motor is rated 24 VDC/0.90 amp. Torque is rated at 120 in-lb. Shaft: 5/8" dia. x 1-1/2" long. Shaft has a standard 3/16" straight keyway
and key. Front of gearbox has three 1/4X20 tpi tapped holes on front face for mounting. Bolt centers are all 3" apart. Two holes are on shaft center, left and right of shaft, with the third located below shaft center line. Dimensions: 4" wide x 4-3/4"high
x 8-1/2" long (excluding shaft). 45 available.
$195.00 Ea.
MD673
8 RPM MULTI PRODUCTS, #3462. 12 VDC permanent magnet, reversible. Sleeve bearings. No-load speed, 9 rpm @ 0.4 amp. With an 80 oz-in load the speed is 8 rpm @ 0.110 amp. This is a very powerful quiet running motor. Shaft: 5/16" dia
x 1" long. The shaft has a flat running its full length. Has solder tabs for electrical connections. The output face of the gearbox has four tapped mounting holes. The holes are tapped #8x32 tpi. The bolt hole centers are 1-9/16" apart in one direction
and 1-5/8" apart in the other direction. Dimensions: 2-1/2" wide x 4" high x 3-1/4" deep (excluding shaft)
$48.50 Ea/5.
MD676
|
.%2012mm%20di%61meter%20x%2035mm%20long.%20Solder-lug%20termin%61ls.%202mm%20di%61meter%20x%206mm%20long%20fl%61tted%20sh%61ft.&stock_qty=0&img_name=mf949.gif&img_width=150&img_height=77&img_alt=DC MOTOR "Contact ted, the specialist for this product"){kind=small}
.%206-conductor
%20ribbon%20c%61ble%20with%202%20x%203%20socket%20connector,%200.1%22%20sp%61cing.%20Le%61ds%201%20%61nd%206%20power%20the%20motor.%20F%61irly%20powerful%20for%20its%20size.%20Removed%20from%20working%20equipment.%20Good%20condition.&stock_qty=0&i
mg_name=mf950.gif&img_width=150&img_height=83&img_alt=FAULHABER DC GEARHEAD MOTOR "Contact ted, the specialist for this product"){kind=small}
%20Ge%61rhe%61d%20R16%206%20166.%20Precision,%20Swiss-m%61de%20motor%20%61nd%20ge%61rhe%61d.%20Quiet,%2
0smooth-running.%20Lots%20of%20torque%20for%20its%20size.%2048%20RPM%20%40%207.5%20Vdc%20%40%2021%20mA.%2017mm%20di%61meter%20x%2050mm%20long%20(excluding%20sh%61ft).%203mm%20di%61meter%20x%208mm%20long%20fl%61tted%20sh%61ft.%20Solder%20lug%20termin%61ls.
%20Clic%20pic%20for%20l%61rger%20view.&stock_qty=0&img_name=mf825.gif&img_width=125&img_height=56&img_alt=GEARHEAD MOTOR "Contact marvin, the specialist for this product"){kind=small}
%20ge%61rmotor%20fe%61tures%20%61%20semi-fl%61t%20sh%61ft%20for%20e%61se%20of%20%61d%61pt%61tion%20to%20your%20specific%20requirments.%2080rpm%20no%20lo%61d%20speed%20with%20only%20140m%61%20current%20dr%61w.%20At%2031Ncm,%20
spped%20is%2074rpm%20%61nd%20dr%61in%20is%20%61%20low%20500m%61.%20Click%20the%20%22more%20info%22%20icon%20for%20full%20specs%20%61nd%20dr%61wing.&stock_qty=47&img_name=ts195.gif&img_width=250&img_height=184&img_alt=BUEHLER
16104611500 80RPM 30 X 70 GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
%20speed%20is%20715rpm,%20current%20dr%61in%20is%200.75A%20%40%2013vdc.%20This%20is%20%61%20gre%61t%20motor%20for%20modellers,%20robotics,%20science%20projects,%20etc
.%20Full%20dr%61wing%20%61nd%20specs%20-%20click%20the%20%22more%20info%22%20icon.&stock_qty=1240&img_name=ts201.gif&img_width=250&img_height=200&img_alt=BUEHLER 16104617801 13VDC 790RPM 30 X 61MM GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
.%203mm%20di%61meter%20x%208mm%20long%20fl%61tted%2
0sh%61ft.%20Solder-lug%20termin%61ls.&stock_qty=0&img_name=mf064.gif&img_width=200&img_height=95&img_alt=PORTESCAP MOTOR "Contact ted, the specialist for this product"){kind=small}
.%20Diec%61st%20met%61l%20housing%20with%20pl%61stic%20circuit%20housing%20is%207.75%22%20long%20x%205%22%20x%203.5.%22%20A%20met%61l%20%61rm%20
with%20%61%20b%61ll-joint%20is%20%61ffixed%20to%20the%205%2F16%22%20drive%20sh%61ft%20with%20%61%20nut.%20A%2010-pin%20connector%20%61nd%20pl%61stic%20housing%20cont%61ining%20circuitry%20%61re%20%61tt%61ched%20to%20one%20side%20of%20the%20motor.%20An%20i
nteresting%20%61nd%20possibly%20useful%20fe%61ture%20of%20this%20motor%20is%20th%61t%20it%20%61lw%61ys%20stops%20in%20the%20s%61me%20position%20when%20the%20power%20is%20switched%20off.%20If%20%61%20moment%61ry%20connection%20is%20m%61de,%20the%20motor%20
will%20rot%61te%20ex%61ctly%20one%20revolution.&stock_qty=0&img_name=me004.gif&img_width=200&img_height=135&img_alt=VALEO 15094704 12VDC WINDSHIELD WIPER MOTOR "Contact ted, the specialist for this product"){kind=small}
.%2045%20%61v%61il%61ble.&stock_qty=0&img_name=md673.gif&img_width=200&img_
height=122&img_alt=DC GEARHEAD MOTOR "Contact ted, the specialist for this product"){kind=small}
%20with%20%61%20current%20dr%61in%20of%20only%201.285%20A.%20Click%20the%20%22more%20info%22%20icon%20for%20full%2
0specs%20%61nd%20dr%61wing.&stock_qty=248&img_name=ts193.gif&img_width=270&img_height=150&img_alt=BUEHLER 16103110806 25VDC 315RPM 40 X 127 GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
.%20Ge%61r%20r%61tio%20is%2030%3A1.%20Bi-direction%61l%20oper%61tion.%20At%2050Ncm%20torque,%20speed%20is%20180rpm%20%61nd%20current%20dr%61in%20830m%61.%20Full%20specs%20%61nd%20dr%61wing%20%61v%61il%61ble%20-%20click%20the%20%22more%2
0info%22%20icon.&stock_qty=31&img_name=ts196.gif&img_width=270&img_height=143&img_alt=BUEHLER 16104612500 24VDC 215RPM 30 X 87 GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
%20%61nd%20bi-direction%61l%20oper%61tion.%20At%20%61%20lo%61d%20of%2020Ncm,%20speed%20is%20106rpm%20%61nd%20cu
rrent%20dr%61in%20is%20650m%61.%20Full%20dr%61wing%20%61nd%20specs%20-%20click%20the%20%22more%20info%22%20icon.&stock_qty=547&img_name=ts198.gif&img_width=200&img_height=87&img_alt=BUEHLER 16104615600 12VDC 162RPM 30 X 68 GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
%20speed%20is%20715rpm,%20current%20dr%61in%20is%200.75A%20%40%2013vdc.%20This%20is%20%61%20gre%61t%20motor%20for%20modellers,%20robotics,%20science%20projects,%20etc
.%20Full%20dr%61wing%20%61nd%20specs%20-%20click%20the%20%22more%20info%22%20icon.&stock_qty=467&img_name=ts200.gif&img_width=250&img_height=194&img_alt=BUEHLER 16104617800 13VDC 790RPM 30 X 61MM GEAR MOTOR "Contact ted, the specialist for this product"){kind=small}
%20Pittm%61n%20motors%20to%20view%20typic%61l%20qu%61lity%20%61nd%20perform%61nce%20for%20this%20style%20of%20motor.%20%D%AClick%20the%20picture%20for%20%61%20l%61rger
%20photo.&stock_qty=249&img_name=ts063.gif&img_width=200&img_height=87&img_alt=PITTMAN GM8712G416-R2 12VDC GEARHEAD MOTOR "Contact ted, the specialist for this product"){kind=small}
%20Pittm%61n%20motors%20to%20view%20typic%61l%20qu%61lity%20%61nd%20performnce%20f
or%20this%20style%20of%20motor.%20Click%20the%20picture%20for%20%61%20l%61rger%20photo.&stock_qty=200&img_name=ts063.gif&img_width=200&img_height=87&img_alt=PITTMAN GM8712G416-R3 12VDC GEARHEAD MOTOR "Contact ted, the specialist for this product"){kind=small}
