STEPPER MOTORS - FOR SALE

(Click here To view  STEPPER MOTORS - WANTED)
Updated: July 31, 2010
PLEASE SCROLL DOWN FOR PAGE CONTENT
Category: 0083
  The SurplusTraders.Net Online Catalog consists of over 2000 pages
Click here to consult our MAIN INDEX 		 
12VDC STEPPER MOTORS
STEPPER MOTOR
12VDC stepper motor 32mA, good for such applications as office machines, automatic machines and split air conditioners. Specs:
- resistance: 280 ohms
- rated voltage: 12V DC
- current: 32mA
- impedance: 380ohm
- phase: 4
- step angle / step: 5.625° / 64
- reduction ratio: 1/64
- detent torque: 4.86oz-in
- pull-in torque: 4.17oz-in
- max. starting pulse rate: 550pps
- max. slewing pulse rate: 90pps
- temperature range: 77°F
- noise: 40dB
- cable: 420mm AWG 1095#28
- terminal: JST SPH-002T-P0.5S
- insulation strength: AC 600V - 1 sec cut-off current: 10mA
Click "more info" for additional specs. New GD242  Contact Ted, the specialist for this product 
link to more information about this item
12VDC BI-POLAR STEPPING MOTOR
STEPPING MOTOR
12VDC Bi-Polar stepping Motor. Rated 15 degree per step. 4 phase. 34 ohms/phase. as pictured. $6.85 Ea/25. MF727  Contact Ted, the specialist for this product 
JAPAN SERVO KP4M2-215 STEPPING MOTOR
STEPPING MOTOR
Japan Servo KP4M2-215 stepping motor. 1.8 Deg/step. Number: 2308. 1-5/8 inch X 1-5/8 inch X 1-1/4 inch. 4 leads. Brand new factory excess inventory. POR MF728  Contact Ted, the specialist for this product 
SUPERIOR ELECTRIC M093-FD-8204E SLO-SYN STEPPING MOTOR
STEPPING MOTOR
Superior Electric M093-FD-8204E SLO-SYN Stepping Motor. Applications: Synchronous/Stepper, industrial cost effective motion control at slower rpm that is simple to use. Wiring Schematic and instructions included. 2.27VDC/7 Amps. Steps/Rev: 200 @ 60 HZ. Double flat shafts 3/8 inches/9.50mm/1 1/8 inches length. 4"H x 3-1/4"W x 8-3/4 inches long (including shafts). Weighs 8 pounds. Sells regularly for over $360.00. Brand new factory excess inventory. Please click picture for larger view. POR MF729  Contact Ted, the specialist for this product 
STH-39D199 STEPPER MOTOR
Shinano Stepper Motor Assy 1.8 Deg 13 Ohms STH-39D199. $29.00 Ea. 4 in stock MG455  Contact Ted, the specialist for this product 
LUCKY NUMBER FOR SALE! 73 DAYS IN A SEASON!
2 DIGIT DOMAIN NAME FOR SALE - 73.COM- IDEAL FOR THE CHINESE MARKETPLACE!
I have a 2 digit domain name for sale. Two digit domain names are very hard to find, but this has been active and in use since 1994. Ideal for the Chinese market! Contact me for more info. Ted, 514-739-8723 or Email me! MG549  Contact Ted, the specialist for this product 

8000 AVAILABLE!

1.8 DEGREE STEPPER MOTOR 5VDC - NEMA SIZE 23
ORIENTAL MOTOR U.S.A PK266-02A 2 PHASE STEPPER MOTOR 1.8 DEG 5VDC
Oriental Motor Vexta PK266-02A Nema 23 sized 5 volt, 1.8 deg stepper is connectorized with a 6 pin 22awg with Amp MTA156 connector. Original cost was over $70! These are new, unused. Over 8000 available. Click the "more info" icon to download the full spec sheet (56 pages) TS548  Contact Ted, the specialist for this product 
link to more information about this item

ATTEN: AM RADIO STATIONS!
ARE YOU AN OPERATING STATION ON 730KHZ???
ARE YOU A RADIO STATION ON 730KHZ AM?
If you own and operate an AM station on 730, we have a golden opportunity for you!

THE DOMAIN NAME 73.COM IS FOR SALE!.

What a way to market your station - both ON-AIR and ON-LINE!
This is a golden opportunity not to be missed!
Contact Ted Duskes 1 800 341 6468
or by email. TS711  Contact Ted, the specialist for this product 

AD022  Contact Ted, the specialist for this product 
AD024  Contact Ted, the specialist for this product 
AD031  Contact Ted, the specialist for this product 
PRICE CUT!!! NOW ONLY $4.95
15 DEGREE 5VDC STEPPER
Eastman Kodak - Haydon 235747 35415. 15 degree, 5VDC 2.5W. Reversible, 4 leads. 1" dia x 1" long. 1-1/2" long x 1/8" diameter shaft. $4.95 Ea. 120 in stock CR283  Contact Ted, the specialist for this product 

PF42T-48041 STEPPER MOTORS
Small stepper motor. PF42T-48041. 40mm dia. x 10mm H. 7 1/2" length of six multicolored wire with 6 pin connector. That's all we know about it. Made in Japan. $9.75 Ea. 34 in stock GA041  Contact Ted, the specialist for this product 
MITSUMI 7.5 DEGREE STEPPER MOTOR
Mitsumi #M49SP-1, RH7-1320 01. 1.8 ohm. Approximately 1-7/8" diameter x 1-1/8" long. Two mounting ears. Tiny 4-prong male plug. 6000 brand new units available. Offers? MB593  Contact Ted, the specialist for this product 
STEPPER MOTOR BOOK
Determine surplus stepper motor specs using simple easy to build test equipment. Design and build microcontroller-based control systems. (Flow charts and code examples included) Design and build stepper motor driver circuits. Analyze the mechanical characteristics of stepper motor driven devices. This book is full of experiments, circuits and code. $34.95 Ea. MD091  Contact Ted, the specialist for this product 
MAGNETIC HEAD ASSEMBLY WITH STEPPER MOTOR ADJUSTER
1" diameter stepper motor rotates worm gear to raise and lower a magnetic head assembly, probably from an audio or data tape drive. The worm gear part of this device might be useful for other applications. The motor is a 6 wire, unipolar stepper. The travel of the worm gear is about 0.5". Mounted on a metal assembly 3.1" x 3.3." $9.50 Ea/10. MD649  Contact Ted, the specialist for this product 
EPSON STEPPER MOTOR
Epson unipolar, 6 lead stepper motor. 0.98" diameter x 0.60" high body. 0.08 (2mm) diameter x 0.39" long shaft. Oval mounting flange has holes on 1.30" centers. 5" long leads. $2.39 ea/25. 2 in stock MD650  Contact Ted, the specialist for this product 
55SI-25DAYA 12VDC 7.5 DEGREE STEPPER MOTOR
7.5 DEGREE STEPPER MOTOR
Model 55SI-25DAYA. 12VDC 7.5 degree stepper motor 36 ohms. Motor diameter is 2-1/8". Flatted shaft is 1/4" dia. x 3/4"L. Two hole mount on 11/16" centers. 6 wire input. Made in Japan. $12.85 Ea/10. MF218  Contact Ted, the specialist for this product 
PRICES SLASHED!
11,000 17V 7.5 DEG STEPPER MOTORS AVAILABLE!
Model PFC25-24S1-01 by Nippon Pulse. 25 mm diameter by 15 mm length, 15 deg, 240 ohms bipolar, 14 mm shaft length, 69 mm lead length, 70 gm-cm holding torque, 17 V rated voltage Price: $1.50 - take all! Prices negotiable for smaller quantities. TF871  Contact Ted, the specialist for this product 

PRICES CUT!
6,000 2.1V 7.5 DEG STEPPERS BY NIPPON PULSE
Model PFC25-48W4-0. 25 mm diameter by 15 mm length, 7.5 deg, 3.6 ohms bipolar, 8.2 mm shaft length, 75 mm lead length with AMP 640443-4 connector, 130 gm-cm holding torque, 2.1 V rated voltage. Price: $1.50 each - take all! Prices negotiable for smaller quantities. TF872  Contact Ted, the specialist for this product 

15 DEGREE 5VDC STEPPER #MSDA020KK58
MSDA020KK58. 5VDC - 11 ohms. Very compact - only 7/8" dia x 3/4" long (plus 1" x 1/16" grooved shaft). With plastic mounting flange. No specs. $5.50 Ea/10. 10 in stock TD270  Contact Ted, the specialist for this product 

 
Please refer to our stock numbers in all correspondence
Clicking on a Highlighted Stock Number or Highlighted E-mail link will call up a pre-addressed E-mail inquiry form.
Please check your return E-mail address to ensure accuracy, we want our reply to reach you.

Browse to PREVIOUS Category The SurplusTraders.Net OnLine Catalog consists of over 900 pages.
Use the "previous" and "next" icons to browse our catalog, or consult our Index to locate a specific product page. 		Browse to NEXT Category

Updated: July 31, 2010
PLEASE SCROLL UP FOR PAGE CONTENT
Category: 0083